Flow Sensor | Flow Monitors | Baseline Systems

Flow Sensor

Features You Can Trust

If you can’t measure your irrigation water, you can’t manage it, let alone conserve it.  You can trust Baseline’s flow solutions to help you keep track of every drop.  Baseline’s irrigation flow sensors and flow meters are accurate across all ranges of flow so you’ll know without a doubt how much water you’re using.

Baseline’s Flow biCoders™ ensure compatibility between virtually any third-party flow device and any Baseline irrigation controller, so retrofitting an existing site to a Baseline system is easy.  Baseline’s irrigation controllers are equipped with powerful flow management and monitoring software that can quickly react to high and low flow situations, isolate the faulty zone, and protect your site from unexpected flow problems.

Baseline’s flow solutions enable you to take precise control over the water at your site.

Baseline’s irrigation controller software can learn the flow for each zone, maximize the number of zones it can turn on at once to help shorten your water windows. In the event of unexpected high or low flow, the controller will automatically determine which zone is at fault and alert you without interrupting the rest of the watering cycle. And, of course, Baseline irrigation controllers can protect your site from mainline breaks with configurable high and low flow shutdown settings.

Baseline’s Irrigation Flow Sensors and Flow Meters

Baseline offers flow solutions to fit just about any site.  From the PFS Series Flow Sensors that provide industry-leading low flow accuracy, to the BHM Series Hydrometers with a high-frequency output for real-time accuracy, Baseline has your flow needs covered.

PFS Series Irrigation Flow Sensors

The Baseline PFS Series Flow Sensors have a unique low drag, a lightweight impeller design, and a specially engineered tee cavity and impeller placement to ensure smooth flow and precise performance at the lowest flow rates.   Every Baseline PFS Series Flow Sensor is two-wire ready with a Flow biCoder built into the tee insert.  Because a Flow biCoder is built into each flow sensor, every device comes pre-configured with the correct K and offset values. The PFS Series Flow Sensors are available in 1½” to 6” sizes.

BFS Brass Flow Sensor

The Baseline BFS Brass Flow Sensor has a unique low drag, a lightweight impeller design, and a specially engineered tee cavity and impeller placement to ensure smooth flow and precise performance at the lowest flow rates.  Every Baseline BFS Series Flow Sensor is two-wire ready with a Flow biCoder built into the tee insert.  Because a Flow biCoder is built into each flow sensor, every device comes pre-configured with the correct K and offset values. The BFS Brass Flow Sensor is available in 1½”.

BFM Series Irrigation Flow Meters

Baseline’s BFM Series Flow Meters are small, rugged, and highly reliable flow meters that are Baseline two-wire ready. The flow meter is available in 3/4” to 1 1/2” pipe sizes. The K and offset values are preconfigured in the flow meters.

IDFS Indoor Flow Sensor

Save massive amounts of time and money by installing a non-invasive solution to flow management. These ultrasonic flow sensors send real-time flow data to Baseline irrigation controllers and to BaseManager and BACnet Manager. With a clamp-on meter you don’t have to cut into the piping infrastructure of your building which puts you at considerable risk for damage and contamination.

Every device comes pre-configured with the correct K and offset values. The IDFS Series Flow Sensors are available in 1/4” to 2” sizes.

BHM Series Irrigation Hydrometers

Baseline’s BHM Series Hydrometer is a Flow Meter and Master Valve combination and is available in normally open and normally closed configurations.  The Hydrometer is available in 1½” to 4” pipe sizes, and every meter is two-wire ready with a built-in Flow biCoder and pre-configured K and offset values.

Baseline’s Flow biCoders™, Flow Sensors, and Flow Meters Features and Specifications

Flow biCoders™ Features

Connection Requirements

Flow Features in the Irrigation Controller Software

Baseline’s Irrigation Flow Sensors and Flow Meters

PFS Series Flow Sensor Features

PFS Series Flow Sensor Specifications

BFS Brass Flow Sensor Features

BFS Brass Flow Sensor Specifications

IDFS Indoor Flow Sensor Features

Baseline Part # Nominal Pipe Size Outside Diameter
BL-IDFS-25 ¼” 13 – 16 mm
BL-IDFS-37 ⅜” 16 – 18 mm
BL-IDFS-50 ½” 18 – 23 mm
BL-IDFS-75 ¾” 23 – 28 mm
BL-IDFS-100 1” 28 – 37 mm
BL-IDFS-125 1¼” 37 – 44 mm
BL-IDFS-150 1½” 44 – 52 mm
BL-IDFS-200 2” 52 – 64 mm

IDFS Indoor Flow Sensor Specifications

BFM Series Flow Meter Features

BFM Series Flow Meter Specifications

BHM Series Hydrometer & Master Valve

BHM Series Hydrometer Specifications

Brochures

Technical Specifications

Installation Details

Installation Guides

General Specifications

Supporting Documents

How to Specify Flow biCoders, Flow Sensors, and Flow Meters

Baseline Flow biCoders

PFS Series Flow Sensors

BFS Brass Flow Sensor

BFM Series Flow Meters

IDFS Indoor Flow Sensors

BHM Series Hydrometer & Master Valve Combination